this datasheet contains new product information. anachip corp. re serves the rights to modify the product specification without notice. no liability is assume d as a result of the use of this product. no rights under any patent accompany the sale of the product. rev. 1.0 dec 16, 2004 1/10 pa7536 peel array? programmable electrically erasable logic array versatile logic array architecture - 12 i/os, 14 inputs, 36 registers/latches - up to 36 logic cell output functions - pla structure with true product-term sharing - logic functions and registers can be i/o-buried ideal for combinatorial, synchronous and asynchronous logic applications - integration of multiple plds and random logic - buried counters, complex state-machines - comparators, decoders, multiplexers and other wide-gate functions high-speed commercial and industrial versions - as fast as 9ns/15ns (tpdi/tpdx), 83.3mhz (f max ) - industrial grade available for 4.5 to 5.5v v cc and -40 to +85 c temperatures cmos electrically erasable technology - reprogrammable in 28-pin dip, soic and plcc packages flexible logic cell - up to 3 output functions per logic cell - d,t and jk registers with special features - independent or global clocks, resets, presets, clock polarity and output enables - sum-of-products logic for output enables development and programmer support - anachip winplace development software - fitters for abel and other software - programming support by popular third-party programmers general description the pa7536 is a member of the programmable electrically erasable logic (peel?) a rray family based on ict?s cmos eeprom technology. peel? arrays free designers from the limitations of ordinary plds by providing the architectural flexibility and speed needed for today?s programmable logic designs. the pa7536 offers a versatile logic array architecture with 12 i/o pins, 14 input pins and 36 registers/latches (12 buried logic cells, 12 input registers/latches and 12 buried registers/latches). its logic array implements 50 sum-of-products logic functions that share 64 product terms. the pa7536?s logic and i/o cells (lccs, iocs) are extremely flexible offering up to three output functions per cell (a total of 36 for all 12 logic cells). cells are configurable as d, t, and jk registers with independent or global clocks, resets, presets, clock polarity, and other special features, making the pa7536 suitable for a variety of combinatorial, synchronous and asynchronous logic applications. the pa7536 offers pin compatibility and super-set functionality to popular 28-pin plds, such as the 26v12. thus, designs that exceed the architectures of such devices can be expanded upon. the pa7536 supports speeds as fast as 9ns/15ns (tpdi/tpdx) and 83.3mhz (f max ) at moderate power consumption 105ma (75ma typical). packaging includes 28-pin dip, soic, and plcc (see figure 1). development and programming support for the pa7536 is provided by anachip and popular third-party development tool manufacturers. figure 1. pin configuration 08-16-001a dip i/clk1 1 i 2 i 3 i 4 i 5 i 6 vcc 7 i 8 i 9 i 10 i 11 i 12 i/o 24 i/o 23 i/o 22 gnd 21 i/o 20 i/o 19 i/o 18 i/o 17 i/o 16 i/o 15 i 13 i 14 i/clk2 28 i/o 27 i/o 26 i/o 25 1 i/clk1 2 i 3 i 4 i 5 i 6 i 7 vcc 8 i 9 i 10 i 11 i 12 i 24 i/o 23 i/o 22 i/o 21 gnd 20 i/o 19 i/o 18 i/o 17 i/o 16 i/o 15 i/o soic 13 i 14 i 28 i/clk2 27 i/o 26 i/o 25 i/o plcc 25 i/o 24 i/o 23 i/o 22 i/o 21 gnd 20 i/o 19 i/o 4 i 3 i 2 i 1 i/clk1 28 i/clk2 27 i/o 26 i/o 5 i 6 i 7 vcc 8 i 9 i 10 i 11 i 12 i 13 i 14 i 15 i/o 16 i/o 17 i/o 18 i/o figure 2. block diagram input cells (inc) 12 input pins 2 input/ global clock pins global cells 2 12 i/o cells (ioc) logic control cells (lcc) 12 12 12 12 a b c d 76 (38x2) array inputs true and complement buried logic 2 sum terms 3 product terms for global cells 12 logic control cells up to 3 output functions per cell (36 total output functions possible) logic functions to i/o cells 12 i/o pins 48 sum terms (four per lcc) logic array 08-16-002a pa7536 i i i i i vcc i i i i i/o i/o i/o i/o i/o i/o gnd i/clk2 i/clk1 i i i/o i/o i/o global cells input cells i/o cells i i/o i/o i/o logic control cells to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 2/10 inside the logic array the heart of the peel? array architecture is based on a logic array structure similar to that of a pla (programmable and, programmable or). the logic array implements all logic functions and provides interconnection and control of the cells. depending on the peel? array selected, a range of 38 to 62 inputs is available into the array from the i/o cells, inputs cells and input/global-clock pins. all inputs provide both true and complement signals, which can be programmed to any product term in the array. the number of product-terms among peel? arrays ranges from 67 to 125. all product terms (with the exception of certain ones fed to the global cells) can be programmably connected to any of the sum-terms of the logic control cells (four sum-terms per logic control cell). product-terms and sum-terms are also routed to the global cells for control purposes. figure 3 shows a detailed view of the logic array structure. from io cells (ioc,inc, i/clk) from logic control cells (lcc) to global cells 38 array inputs 67 product terms to logic control cells (lcc) 50 sum terms pa7536 logic array 08-16-003a figure 3 pa7536 logic array true product-term sharing the peel? logic array provi des several advantages over common pld logic arrays. first, it allows for true product- term sharing, not simply product-term steering, as commonly found in other cplds. product term sharing ensures that product-terms are used where they are needed and not left unutilized or duplicated. secondly, the sum-of-products functions provided to the logic cells can be used for clocks, resets, presets and output enables instead of just simple product-term control. the peel? logic array can also implement logic functions with many product terms within a single-level delay. for example a 16-bit comparat or needs 32 shared product terms to implement 16 exclusive-or functions. the peel? logic array easily handles this in a single level delay. other plds/cplds eit her run out of product-terms or require expanders or additional logic levels that often slow performance and skew timing. logic control cell (lcc) logic control cells (lcc) are used to allocate and control the logic functions created in the logic array. each lcc has four primary inputs and thr ee outputs. the inputs to each lcc are complete sum-of-produ ct logic functions from the array, which can be used to implement combinatorial and sequential logic functions, and to control lcc registers and i/o cell output enables. a b c d reg d,t,j k r p q mux system clock preset reset on/off regtype from global cell mux mux to array to i/o cell from array 08-16-004a figure 4. logic control cell block diagram as shown in figure 4, the lcc is made up of three signal routing multiplexers and a versatile register with synchronous or asynchronous d, t, or jk registers (clocked-sr registers, which ar e a subset of jk, are also possible). see figure 5. eeprom memory cells are used for programming the desired c onfiguration. four sum-of- product logic functions (sum terms a, b, c and d) are fed into each lcc from the logic array. each sum term can be selectively used for multiple functions as listed below. to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 3/10 sum-a = d, t, j or sum-a sum-b = preset, k or sum-b sum-c = reset, clock, sum-c sum-d = clock, output enable, sum-d d r p q d register q = d after clocked best for storage, simple counters, shifters and state machines with few hold (loop) conditions. t r p q t register q toggles when t = 1 q holds when t = 0 best for wide binary counters (saves product terms) and state machines with many hold (loop) conditions. jk register q toggles when j/k = 1/1 q holds when j/k = 0/0 q = 1 when j/k = 1/0 q = 0 when j/k = 0/1 combines features of both d and t registers. j r p q k 08-16-005a figure 5. lcc register types sum-a can serve as the d, t, or j input of the register or a combinatorial path. sum-b can serve as the k input, or the preset to the register, or a combinatorial path. sum-c can be the clock, the reset to the register, or a combinatorial path. sum-d can be the clock to the register, the output enable for the connected i/o cell, or an internal feedback node. note that the sums cont rolling clocks, resets, presets and output enables are complete sum-of-product functions, not just product terms as with most other plds. this also means that any input or i/o pin can be used as a clock or other control function. several signals from the global cell are provided primarily for synchronous (global) register control. the global cell signals are routed to all lccs. these signals include a high-speed clock of positive or negative polarity, global preset and reset, and a special register-type control that selectively allows dynamic switching of register type. this last feature is especially useful for saving product terms when implementing loadable counters and state machines by dynamically switching from d-type registers to load and t-type registers to count (see figure 11). multiple outputs per logic cell an important feature of the logi c control cell is its capability to have multiple output functions per cell, each operating independently. as shown in figure 4, two of the three outputs can select the q output from the register or the sum a, b or c combinatorial paths. thus, one lcc output can be registered, one output can be combinatorial and the third, an output enable or an additional buried logic function. the multi-function peel? array logic cells are equivalent to two or three macrocells of other plds, which have only one output per cell. they also allow registers to be truly buried from i/o pins without limiting them to input-only (see figure 8 and figure 9). i/o cell (ioc) input cell (inc) reg/ latch q mux input to array input cell clock from global cell mux from logic control cell a,b,c or q mux mux 1 0 d i/o pin mux to array reg/ latch q input cell clock from global cell input input 08-16-006a figure 6. i/o cell block diagram ioc/inc register q = d after rising edge of clock holds until next rising edge ioc/inc latch q = l when clock is high holds value when clock is low lq d q 08-16-007a figure 7. ioc regist er configurations to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 4/10 input cells (inc) input cells (inc) are included on dedicated input pins. the block diagram of the inc is shown in figure 6. each inc consists of a multiplexer and a register/transparent latch, which can be clocked from vari ous sources selected by the global cell. the register is rising edge clocked. the latch is transparent when the clock is high and latched on the clock?s failing edge. the register/latch can also be bypassed for a non registered input. i/o cell (ioc) all peel? arrays have i/o cells (ioc) as shown above in figure 6. inputs to the iocs can be fed from any of the lccs in the array. each ioc consists of routing and control multiplexers, an input register/transparent latch, a three- state buffer and an output polarit y control. the register/ latch can be clocked from a va riety of sources determined by the global cell. it can also be bypassed for a non- registered input. a feature of the 7536 ioc is the use of sum-d as a feed-back to the array when the i/o pin is a dedicated output. this allows for additional buried registers and logic paths. (see figure 8 & figure 9). i/o with independent output enable i/o q d input with optional register/latch a b c d 1 2 oe dq 08-16-008a figure 8. lcc & ioc with two outputs a b c d output 1 2 3 buried register or logic paths qd dq 08-16-009a figure 9. lcc & ioc with three outputs global cells the global cells, shown in figure 10, are used to direct global clock signals and/or control terms to the lccs, iocs and incs. the global cells allow a clock to be selected from the clk1 pin, clk2 pin, or a product term from the logic array (pclk). they also provide polarity control for ioc clocks enabling rising or falling clock edges for input registers/latches. note that each individual lcc clock has its own polarity control. the global cell includes sum-of- products control terms for global reset and preset, and a fast product term control fo r lcc register-t ype, used to save product terms for loadable counters and state machines (see figure 11). the pa7536 provides two global cells that divide the lcc and iocs into two groups, a and b. half of the lccs and iocs use global cell a, half use global cell b. this means, for instance, two high-speed global clocks can be used among the lccs. global cell: lcc & ioc mux mux clk1 clk2 pclk reg-type preset reset lcc resets lcc presets lcc reg-type ioc clocks lcc clocks global cell: inc mux clk1 clk2 pclk inc clocks group a & b 08-16-010a figure 10. global cells register type change feature global cell can dynamically change user- selected lcc registers from d to t or from d to jk. this saves product terms for loadable counters or state machines. use as d register to load, use as t or jk to count. timing allows dynamic operation. t r p q d r p q reg-type from global cell example: product terms for 10 bit loadable binary counter d uses 57 product terms (47 count, 10 load) t uses 30 product terms (10 count, 20 load) d/t uses 20 product terms (10 count, 10 load) 08-16-011a figure 11. register ty pe change feature to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 5/10 peel? array development support development support for peel ? arrays is provided by anachip and manufacturers of popular development tools. anachip offers the powerful place development software (free to qualified pld designers). the place software includes an architectural editor, logic compiler, waveform simulator, documentation utility and a programmer interface. the place editor graphically illustrates and controls the peel? array?s architecture, making the overall design easy to understand, while allowing the effectiveness of boolean logi c equations, state machine design and truth table entry. the place compiler performs logic transformation and reduct ion, making it possible to specify equations in almost any fashion and fit the most logic possible in every design. place also provides a multi-level logic simulator allowing external and internal signals to be simulated and analyzed via a waveform display.(see figure 12, figure 13 and figure 14) figure 12 - place architectural editor for pa7536 peel? array development is also supported by popular development tools, such as abel and cupl, via ict?s peel? array fitters. a special smart translator utility adds the capability to directly c onvert jedec f iles for other devices into equivalent jedec files for pin-compatible peel? arrays. programming peel? arrays are ee-reprogrammable in all package types, plastic-dip, plcc and soic. this makes them an ideal development vehicle for the lab. ee- reprogrammability is also usef ul for production, allowing unexpected changes to be made qui ckly and without waste. programming of peel? arrays is supported by popular third party programmers. design security and signature word the peel? arrays provide a special eeprom security bit that prevents unauthorized readi ng or copying of designs. once set, the programmed bits of the peel? arrays cannot be accessed until the entire chip has been electrically erased. another programming feature, signature word, allows a user-definable code to be programmed into the peel? array. the code can be read back even after the security bi t has been set. the signature word can be used to identify the pattern programmed in the device or to record the design revision. figure 13 - place lcc and ioc screen figure 14 - place simulator screen to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 6/10 this device has been designed and tested for the specified operating ranges. improper operation outside of these levels is not guaranteed. exposure to absolute maximum ratings may cause permanent damage. table 1. absolute maximum ratings symbol parameter conditions ratings unit v cc supply voltage relative to ground -0.5 to + 7.0 v v i , v o voltage applied to any pin relative to ground 1 -0.5 to v cc + 0.6 v i o output current per pin (i ol , i oh ) 25 ma t st storage temperature -65 to + 150 c t lt lead temperature soldering 10 seconds +300 c table 2. operating ranges symbol parameter conditions min max unit commercial 4.75 5.25 v cc supply voltage industrial 4.5 5.5 v commercial 0 +70 t a ambient temperature industrial -40 +85 c t r clock rise time see note 2 20 ns t f clock fall time see note 2 20 ns t rvcc v cc rise time see note 2 250 ms table 3. d.c. electri cal characteristics over the operating range symbol parameter conditions min max unit v oh output high voltage - ttl v cc = min, i oh = -4.0ma 2.4 v v ohc output high voltage - cmos v cc = min, i oh = -10a v cc - 0.3 v v ol output low voltage - ttl v cc = min, i ol = 16ma 0.5 v v olc output low voltage - cmos v cc = min, i ol = -10a 0.15 v v ih input high level 2.0 v cc + 0.3 v v il input low level -0.3 0.8 v i il input leakage current v cc = max, gnd ?v in ?v cc 10 a i oz output leakage current i/o = high-z, gnd ?v o ?v cc 10 a i sc output short circuit current 4 v cc = 5v, v o = 0.5v, ta= 25c -30 -120 ma i cc 11 v cc current v in = 0v or v cc 3,11 f = 25mhz all outputs disabled 4 -15 45 (typ.) 19 70 ma c in 7 input capacitance 5 6 pf c out 7 output capacitance 5 t a = 25c, v cc = 5.0v @ f = 1 mhz 12 pf to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 7/10 table 4. a.c electrical ch aracteristics combinatorial over the operating range -15/i-15 unit symbol parameter 6,12 min max t pdi propagation delay internal (t al + t lc ) 9 ns t pdx propagation delay external (t ia + t al +t lc + t lo ) 15 ns t ia input or i/o pin to array input 2 ns t al array input to lcc 8 ns t lc lcc input to lcc output 10 1 ns t lo lcc output to output pin 4 ns t od , t oe output disable, enable from lcc output 7 4 ns t ox output disable, enable from input pin 7 15 ns this device has been designed and tested for the recommended operating conditions. proper operation outside of these levels is not guaranteed. exposure to absolute maximum ratings may cause permanent damage. figure 15. combinatorial timing - waveforms and block diagram to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 8/10 table 5. a.c. electrical characteristics sequential -15/i-15 unit symbol parameter 6,1 min max t sci internal set-up to system clock 8 - lcc 14 (t al + t sk + t lc - t ck ) 5 ns t scx input 16 (ext.) set-up to system clock, - lcc (t ia + t sci ) 7 ns t coi system-clock to array int. - lcc/ioc/inc 14 (t ck +t lc ) 7 ns t cox system-clock to output ext. - lcc (t coi + t lo ) 11 ns t hx input hold time from system clock - lcc 0 ns t sk lcc input set-up to async. clock 13 - lcc 2 ns t ak clock at lcc or ioc - lcc output 1 ns t hk lcc input hold time from system clock - lcc 4 ns t si input set-up to system clock - ioc/inc 14 (t sk - t ck ) 0 ns t hi input hold time from system clock - ioc/inc (t sk - t ck ) 4 ns t pk array input to ioc pclk clock 6 ns t spi input set-up to pclk clock 17 - ioc/inc (t sk -t pk -t ia ) 0 ns t hpi input hold from pclk clock 17 - ioc/inc (t pk +t ia -t sk ) 6 ns t sd input set-up to system clock - ioc/inc sum-d 15 ( tia + t al + t lc + t sk - t ck ) 7 ns t hd input hold time from system clock - ioc sum-d 0 ns t sdp input set-up to pclk clock ( tia + t al + t lc + t sk ? t pk ) - ioc sum-d 7 ns thdp input hold time from pclk clock - ioc sum-d 0 ns t ck system-clock delay to lcc/ioc/inc 6 ns t cw system-clock low or high pulse width 6 ns f max1 max. system-clock frequency int/int 1/(t sci + t coi ) 83.3 mhz f max2 max. system-clock frequency ext/int 1/(t scx + t coi ) 71.4 mhz f max3 max. system-clock frequency int/ext 1/(t sci + t cox ) 62.5 mhz f max4 max. system-clock frequency ext/ext 1/(t scx + t cox ) 55.5 mhz f tgl max. system-clock toggle frequency 1/(t cw + t cw ) 9 83.3 mhz t pr lcc presents/reset to lcc output 1 ns t st input to global cell present/reset (t ia + t al + t pr ) 11 ns t aw asynch. preset/reset pulse width 8 ns t rt input to lcc reg-type (rt) 7 ns t rtv lcc reg-type to lcc output register change 1 ns t rtc input to global cell register-type change (t rt + t rtv ) 8 ns t rw asynch. reg-type pulse width 10 ns t reset power-on reset time for registers in clear state 2 5 s to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 9/10 figure 16. sequential timing ? waveforms and block diagram notes 1. minimum dc input is -0.5v, however inputs may under-shoot to -2.0v for periods less than 20ns. 2.test points for clock and v cc in t r ,t f ,t cl ,t ch , and t reset are referenced at 10% and 90% levels. 3. i/o pins are 0v or v cc . 4. test one output at a time for a duration of less than 1 sec. 5. capacitances are tested on a sample basis. 6. test conditions assume: signal trans ition times of 5ns or less from the 10% and 90% points, timing reference levels of 1.5v (unless otherwise specified). 7. t oe is measured from input transition to v ref 0.1v (see test loads at end of section 6 for v ref value). t od is measured from input transition to v oh -0.1v or v ol +0.1v. 8. ?system-clock? refers to pi n 1 or pin 28 high speed clocks. 9. for t or jk registers in toggle (divide by 2) operation only. 10. for combinatorial and async-clock to lcc output delay. 11. icc for a typical application: this parameter is tested with the device programmed as a 10-bit d-type counter. 12. test loads are specified in section 5 of the data book. 13. ?async. clock? refers to the clock from the sum term (or gate). 14. the ?lcc? term indicates that the timing parameter is applied to the lcc register. the ?ioc? term indicates that the timing parameter is applied to the ioc register. the ?lcc/ioc? term indicates that the timing parameter is applied to both the lcc and ioc registers. the ?lcc/ioc/inc? term indicates that the timing parameter is applied to the lcc,ioc, and inc registers. 15. this refers to the sum-d gate routed to the ioc register for an additional buried register. 16. the term ?input? without any reference to another term refers to an (external) input pin. 17. the parameter t spi indicates that the pclk signal to the ioc register is always slower than the data from the pin or input by the absolute value of (t sk -t pk -t ia ). this means that no set-up time for the data from the pin or input is required, i.e. the external data and clock can be sent to the device simultaneously . additionally, the data from the pin must remain stable for t hpi time, i.e. to wait for the pclk signal to arrive at the ioc register. 18. typical (typ) icc is measured at t a = 25 c, freq = 25mhz, v cc = 5v to find out if the package you need is available, contact customer service
anachip corp. www.anachip.com.tw rev. 1.0 dec 16, 2004 10/10 table 6. ordering information part number speed temperature package pa7536p-15 (l) p28 pa7536j-15 (l) j28 pa7536s-15 (l) c s28 pa7536pi-15 (l) p28 pa7536ji-15 (l) j28 pa7536si-15 (l) 9/15ns i s28 figure 17. part number device suffix pa7536ji-15x package p = plastic 600mil dip s = soic j = plastic (j) leaded chip carrier (plcc) temperature range (blank) = commercial 0 to 70 o c i = industrial -40 to +85 o c speed -15 = 9ns/15ns tpd/tpdx lead free blank : normal l : lead free package anachip corp. head office, 2f, no. 24-2, industry e. rd. iv, science-based industrial park, hsinchu, 300, taiwan tel: +886-3-5678234 fax: +886-3-5678368 email: sales_usa@anachip.com website: http://www.anachip.com anachip usa 780 montague expressway, #201 san jose, ca 95131 tel: (408) 321-9600 fax: (408) 321-9696 ?2004 anachip corp. anachip reserves the right to make changes in specifications at any time and wit hout notice. the information furnished by anachip in this publication is believed to be accurate and reli able. however, there is no resp onsibility assumed by anachip for its use nor for any infringements of pa tents or other rights of third parties resu lting from its use. no license is granted under any patents or patent rights of anachi p. anachip?s products are not authorized for use as critical components in life support devices or systems. marks bearing ? or ? are registered trademar ks and trademarks of anachip corp. to find out if the package you need is available, contact customer service
|
